Since 1915, TOMI-TEX has been involved in a textile machinery field, especially in narrow fabric weaving. Through such considerable experience, TOMI-TEX develops 3-D weaving system. It enables us to produce 3-D fabrics that no one can realize with any conventional loom. TOMI-TEX directly weaves various small-sized 3-D fabrics to be used for composite material applications.

Features of our 3D woven textiles:

1. High Delamination Resistance: each layer of the fabric is joined by warp yarn and no delamination occurs.

2. Rigid Edges: our 3-D Fabrics have one woven edge and one selvedge edge, preventing separation of both edges of the fabric.

3. Lower Cost: during weaving, weft yarn is continuously inserted between warp yarn without being cut at both edges of the fabric, which saves waste of yarn and labor of yarn exchange. Also, each layer is joined by warp yarn only without another vertical yarn. Consequently, any stitch process is not required during weaving.

4. Multiple weft insertion: two kinds of weft yarn can be inserted respectively from left and right sides of the fabric. For example, "carbon 3K from left and 12k from right", "carbon fiber from left and glass fiber from right". Moreover, you can use double weft insertion at left and right sides. Thus, it is possible to use maximum four kinds of weft yarn in one fabric.