Our company ESTCOM CZ - oxidová keramika a.s.is settled in the area of Elektroporcelán Louny a.s. which is situated in the west of the town of Louny (coming from highway Prague - Chomutov it is necessary to turn to the right on exit Louny - západ (Louny - West) in the foothills of The České středohoří Route-identification map.
We continue in the production of oxide ceramics, which had a tradition in area since 1967. The first products produced in the plant were pyrometric tubes and capillaries made from mullite or mullite-alumina ceramics. In the following years new products were put into production and the assortments of oxide ceramics were extended as well.
Technology
The main production processes are the technology of vacuum press extrusion, dry pressing technology, injection casting technology and wet pressing technology. The most important products are through these technologies realised.
- Extrusion Technology on a Vacuum Press Machines tubes and capillaries with a working temperature between 1500-1800°C
- Dry Pressing Technology seal elements are made of high alumina ceramics with good abrasion resistance. The working surfaces are cut and polished up to a toughness of Ra 0.3 - 0.1 µm with a flatness of up to 0.6 µm
- Injection Moulding Technology construction alumina parts of abrasion resistant materials with a fracture toughness of up to 4.6 MPa, ceramic cores for the precision casting process are made from porous aluminosiliceous ceramics containing 80% SiO2
- Wet Pressing Technology crucubles, lids, funnels and heads of porous materials T 02, LUNIT 20/1350
|